Search results
Results from the 24/7 Vacations Content Network
Automatic dampers are used to regulate airflow constantly and are operated by electric or pneumatic motors, in turn controlled by a thermostat or building automation system.
MagneRide is an automotive adaptive suspension with magnetorheological damper system developed by the Delphi Automotive corporation, that uses magnetically controlled dampers, or shock absorbers, for a highly adaptive ride.
Computer Active Technology Suspension (CATS) co-ordinates the best possible balance between ride quality and handling by analysing road conditions and making up to 3,000 adjustments every second to the suspension settings via electronically controlled dampers .
A shock absorber or damper is a mechanical or hydraulic device designed to absorb and damp shock impulses. It does this by converting the kinetic energy of the shock into another form of energy (typically heat ) which is then dissipated.
Speed Dependent Damping Control (also called SD²C) was an automatic damper system installed on late-1980s and early-1990s Cadillac automobiles. This system firmed up the suspension at 25 mph (40 km/h) and again at 60 mph (97 km/h).
The yaw damper system consists of a series of accelerometers and sensors that monitor the aircraft rate of yaw; these are electronically interconnected to a flight computer that processes these inputs and automatically controls actuators connected to the rudder.
A multi-mode adaptive suspension replaces the fixed steel coils and dampers of the WRX, allowing drivers to dial in their preferred ride.
An electronically variable damper uses a radial damper with hydraulic fluid that flows freely at low speeds, allowing easy turning, while restricting flow at higher speeds when more damping is necessary, as determined by the ECM (Electronic Control Module). A prime example of this is HPSD (Honda Progressive Steering Damper) All dampers use what ...
But one part left us perplexed: the upper control arm damper. We spoke to Jon Simms, lead engineer for the Ghost, for more information, and now we have a better grasp on what it is and what it...
Interior of German mechanical fire damper inside of a galvanised steel duct. Fire dampers (or fire shutters) are passive fire protection products used in heating, ventilation, and air conditioning (HVAC) ducts to prevent and isolate the spread of fire inside the ductwork through fire-resistance rated walls and floors. [1]